AMX design xpress home theater v1.3 ユーザーガイド

The Device Configuration dialog is used to add or edit devices in the Device Information List. Use 

the options in this dialog to select the device type, the display name, control method and other 

information specific to the control method.

 

Click the Add button in the System Information dialog to open the Device Configuration 

dialog to configure a new device.

 

Select a Device from the Device Information table (in the System Information dialog) and 

click the Edit command button (or double-click on a device in the table) to open the 

Device Configuration dialog.

When a device using IR Control is selected for editing, the Device Configuration dialog divides out 

into four tabs:

 

Device Data: Contains fields that specify the device type, device display name, control 

method and control data for a controlled device in the project.

 

IR Mapping: The options in this tab help to insure that the button you press on the touch 

panel does what you expect. This tab is where you specify the IR Mapping for the 

selected device.

 

Control Configuration: The options in this tab are used to configure the AMX IR port to 

properly transmit the IR signal to the AV equipment. This tab requires that you know how 

your equipment operates.

 

The selected device is IR-controlled (IR was selected as the Control Method in the 

Device Data tab).

 

An IR file has been associated with the device (via the IR Data options in the Device 

Data tab).

 

Power Control: The options in this tab allow you to configure power control for the AV 

equipment. This tab requires that you know how your equipment operates.

The options in the Device Data tab of the Device Configuration dialog allow you to associate a 

control method to a new device in the system. The options in this tab include: 

 

Device Data: When defining a source you must first define the type of the source. The 

Source Type determines what pages are added to the touch panel file and what control 

functions are assigned to the device. The Display Name is used with the touch panel 

menus to reference the device. Each Display name should be unique to differentiate the 

devices in the wizard and on the touch panel.