HP ProLiant ML330 G6 ユーザーズマニュアル
Operations 25
4.
Place the tower server on its side.
5.
Remove the air baffle (on page
6.
Disconnect the power cable from the processor board.
7.
Using a T-15 Torx screwdriver, remove the screws securing the processor board.
8.
Remove the processor board.
9.
Using the wrench provided in the kit, remove the mezzanine support stand-offs.
10.
Remove the metal plate.
Install the processor board
1.
Power down the server (on page
).
2.
Do one of the following:
o
Open or remove the tower bezel, as needed ("
o
Extend the server from the rack (on page