Canon ir2016, ir2020 マニュアル

6

iR2016J / iR2016 / iR2020 /  / iR2016i / iR2020i

T-3-2

E719

0000

Erroneous communication with card reader (serial communication) 
- Disconnection from the card reader 
has been detected since 
communication started after 
confirmation of normal connection to 
the card reader (after power-on). 
- A serial communication error has 
occurred. (The serial communication 
error cannot be recovered.)

- Check the connectors of the card reader and 
image processor PCB.
- Replace the card reader for normal 
connection. 
- Replace the image processor PCB.

0002

Erroneous communication with coin vendor (serial communication)
- Disconnection from the coin vendor 
has been detected since 
communication started after 
confirmation of normal connection to 
the coin vendor (after power-on). 
- A serial communication error has 
occurred. (The serial communication 
error cannot be recovered.)

- Check the connection between the image 
processor PCB and serial PCB. 
- Check the connectors of the serial PCB and 
coin vendor for normal connection. 
- Replace the serial PCB. 
- Check the coin vendor. 
- Replace the image processor PCB.

E733

0000

Erroneous communication between controller and printer 
Cannot communicate with the printer 
at startup.

- Check the connectors of the DC controller 
PCB and image processor PCB for normal 
connection. 
- Check the power supply of the printer 
(Check whether initialization is performed at 
startup). 
- Replace the DC controller PCB or image 
processor PCB. 

E736

0000

CCU communication error
The installed modem PCB is 
incompatible.

- Check the connectors of the image processor 
PCB and modem.
- Replace the modem PCB. 
- Replace the image processor PCB.

E739

0000

Erroneous communication between controller and network board
The installed network board is 
incompatible.

- Check the connectors of the image processor 
PCB and LAN PCB for normal connection. 
- Replace the LAN PCB.
- Replace the image processor PCB.

E805

0000

Fan failure
The fan is faulty. 

- Check the fan connector. 
- Replace the fan.
- Replace the DC controller PCB.

E808

0000

Fixing drive circuit failure
- The heater does not turn on.
- A fixing drive motor failure was 
detected. 

- Check the connector of the fixing film unit. 
- Replace the fixing film unit. 
- Replace the fixing drive motor. 
- Replace the DC controller PCB.
- Replace the power supply PCB. 

0104

Delay jam in paper 
pickup section

SR209

The registration sensor cannot detect the leading edge of paper from 
the moment paper pickup starts to the moment the jam detection 
time is reached. 

0208

Stationary jam in paper 
pickup section

SR209

The registration sensor cannot detect the no paper status specified 
time before the leading edge of the picked up paper reaches this 
sensor.

010c

Delay jam in deliver 
section

SR202, 
SR203, 
SR209

- The fixing delivery sensor cannot detect presence of paper within 
the specified time after turning on of the registration clutch.
- The fixing delivery sensor detected absence of paper within the 
specified time after the sensor had detected presence of paper within 
the specified time after turning on of the registration clutch.
- The No.1 delivery sensor cannot detect presence of paper within 
the specified time after turning on of the fixing delivery sensor.

0210

Stationary jam in 
delivery section

SR202, 
SR203

- The fixing delivery sensor cannot detect absence of paper within 
the specified time after turning off of the registration clutch.
- The fixing delivery sensor cannot detect absence of paper within 
the specified time after the sensor detected the leading edge of 
paper. 
- The No.1 delivery sensor cannot detect absence of paper within 
the specified time after the sensor detected the leading edge of 
paper.

0214

Stationary jam in 
machine

SR202, 
SR203, 
SR209

Paper was detected in the paper transport path during initial 
rotation, during automatic delivery, at the end of cleaning, or at 
reception of an emergency stop command.