Juniper CBL-M40-PWR-AU ユーザーズマニュアル
Install the Router without Using a Mechanical Lift
M40 Internet Router Hardware Guide
116
Figure 42: Reinstall the Cable Management System Cover
Reinstall the Fan Tray
The fan tray is located at the rear of the chassis, beneath the upper impeller assembly (see
Figure 2). On some M40 routers, the tray is covered by a protective screen, which should
already be in place on the tray. To reinstall the tray, follow this procedure (see Figure 43):
Figure 2). On some M40 routers, the tray is covered by a protective screen, which should
already be in place on the tray. To reinstall the tray, follow this procedure (see Figure 43):
1.
Attach an ESD strap to your bare wrist and connect the strap to one of the ESD points on
the chassis.
the chassis.
2.
Slide the fan tray into the chassis.
3.
Align the screws at the corners of the fan tray with the mounting holes at the edges of
the opening and use a Phillips screwdriver to tighten the screws.
the opening and use a Phillips screwdriver to tighten the screws.
Figure 43: Reinstall the Fan Tray
1076
Captive screws
1053