Philips VR1000 ユーザーズマニュアル
— 15 —
Power Save Mode
You can reduce the power consumption
while the VCR is turned off.
while the VCR is turned off.
1
Select Mode Set Screen
1 Press
MENU
.
2 Press
5 or ∞ to select “MODE
SET” then press
OK
or 4.
2
Set Power Save Mode
Press
5 or ∞ to select “POWER
SAVE” then press
OK
or 4 to set to
“ON”.
3
Finish Setting
Press
MENU
.
• During Power Save, the display window
will be turned off.
• The Just Clock function (✈ P. 20) does not
work while the Power Save mode is
engaged.
engaged.
• While the VCR is in the Power Save mode,
the picture may be distorted momentarily
when you turn on/off the VCR.
when you turn on/off the VCR.
• Power Save does not work when ...
... the VCR is in the Timer mode.
... the VCR's power is turned off after
... the VCR is in the Timer mode.
... the VCR's power is turned off after
timer-recording (or One Touch
Recording).
Recording).
... the Auto Satellite Prog Recording mode
is engaged (✈P. 28).
... “AV2 SELECT” is set to “DECODER”
or “SAT” (✈P. 27).
Preset Download
When you want to perform Preset
Download after setting channels,
perform the following procedure.
For the detail of Preset Download, see
page 11-13.
Download after setting channels,
perform the following procedure.
For the detail of Preset Download, see
page 11-13.
1
Perform Preset Download
1 Press
MENU
.
2 Press
5 or ∞ to select “AUTO CH
SET”, then press
OK
or 4.
3 Press
5 or ∞ to select “FOLLOW
TV”, then press
OK
or 4. The
Follow TV screen appears and then
Guide Prog. Set screen appears.
Guide Prog. Set screen appears.
MODE SET
DSPC
ON
O. S. D.
ON
DIRECT RECORD
ON
AUTO SP
=LP TIMER OFF
DIGITAL 3R
ON
POWER SAVE
OFF
S-VHS
AUTO
NEXT PAGE
[
5∞] =
[MENU] : EXIT
PR: channel positions
CH: channel numbers
ID: station names (✈P.18)
• The blueback screen and the programme
currently being broadcasted by the blinking
station appear alternately for 8 seconds each.
• To view the next page, use the
5∞ 23 button
on the remote control.
The stations located in the selected country
appear at the top of the list.
• The Guide Programme numbers will also be set
automatically.
3
Finish Setting
Press MENU to exit the menu opera-
tions.
tions.
Auto Channel Setting
If you move to another place, you may
need to tune the VCR tuner again for
your new residential area.
need to tune the VCR tuner again for
your new residential area.
1
Perform Auto Channel Set
1 Press
MENU
.
2 Press
5 or ∞ to select “AUTO CH
SET”, then press
OK
or 4.
3 Press
5 or ∞ to select “AUTO SET”,
then press
OK
or 4. The Auto Set
screen appears as below;
2
Confirm Programmed Channel
Information List
Information List
Once it is completed, “COMPLETED”
is displayed on the screen for about 5
seconds.
The following screen will appear after
5 seconds, or if you press MENU;
is displayed on the screen for about 5
seconds.
The following screen will appear after
5 seconds, or if you press MENU;
PR
CH
ID
PR
CH
ID
01
26
BBC1
08
– – – –
02
33
BBC2
09
– – – –
03
23
ITV
10
– – – –
04
30
CH4
11
– – – –
05
37
CH5
12
– – – –
06
– – – – 13
– – – –
07
– – – – 14
– – – –
[
5∞
]
=
: EDIT
= [CLEAR] : DELETE
[MENU] : EXIT
5
5
5
The Auto Set screen appears, and
remains on screen while the VCR
searches for receivable stations.
As Auto Channel Set progresses,
the “ ” mark on the screen moves
from left to right.
Wait until the screen as shown in step 2
appears.
remains on screen while the VCR
searches for receivable stations.
As Auto Channel Set progresses,
the “ ” mark on the screen moves
from left to right.
Wait until the screen as shown in step 2
appears.
2
Confirm Programmed Channel
Information List
Information List
Once it is completed, “SCAN COM-
PLETED” is displayed on the screen
for about 5 seconds.
The following screen will appear after
5 seconds, or if you press MENU;
PLETED” is displayed on the screen
for about 5 seconds.
The following screen will appear after
5 seconds, or if you press MENU;
C: Cable
PR: channel positions
CH: channel numbers
ID: station names (✈P.18)
• The blueback screen and the programme
currently being broadcasted by the blinking
station
apppear alternately for 8 seconds each.
• To view the next page, use the
5∞ 23 button
on the remote control.
The stations located in the selected country
appear at the top of the list.
• The Guide Program numbers will also be set
automatically during Auto Channel Set.
3
Finish Setting
Press MENU to exit the menu opera-
tions.
tions.
Notes:
• If you perform Auto Channel Set when the
• If you perform Auto Channel Set when the
aerial cable is not connected properly,
“SCAN COMPLETED -NO SIGNAL-”
appears on the screen in step 2. When this
happens, make sure of the aerial
connection and press OK; Auto Channel
Set will take place again.
“SCAN COMPLETED -NO SIGNAL-”
appears on the screen in step 2. When this
happens, make sure of the aerial
connection and press OK; Auto Channel
Set will take place again.
• Depending on reception conditions, the
stations may not be stored in order, and
the station names may not be stored
correctly.
the station names may not be stored
correctly.
AUTO SET
PLEASE WAIT
0 – – – – – + – – – –
■
– – – – + – – – – – +
[MENU] : EXIT
Beginning
End
PR
CH
ID
PR
CH
ID
01
26
BBC1
08
– – – –
02
33
BBC2
09
– – – –
03
23
ITV
10
– – – –
04
30
CH4
11
– – – –
05
37
CH5
12
– – – –
06
– – – – 13
– – – –
07
– – – – 14
– – – –
[
5∞
]
=
: EDIT
= [CLEAR] : DELETE
[MENU] : EXIT
5
5
5
VR1000/07-New
99.7.8, 8:01 PM
15