Mitsubishi Electronics XD3200U ユーザーズマニュアル

ページ / 17
EN-9
1
Enter “0” and press the Enter key. 
2
Input the old (current) password and press the Enter 
key. (Default password is admin.)
If you input a wrong password, an error message 
appears and the setting menu is displayed again. 
In this case, set the password again.
If you forget your password, select “7 
factory defaults,” input the password 
“projectorcontroller,” and then select “9 save and 
exit” to perform initialization.
3
Input a new password (example: “proj2000”) and 
press the Enter key. 
(Note)
Use single-byte alphanumeric characters only. 
4
Input the new password (example: “proj2000”) again 
and press the Enter key.
If you input a wrong password, an error message 
appears and the setting menu is displayed again. 
In this case, set the password again.
Setting the password (Password Setup)
Preparation/SetUp (continued)