Denso ofice pro 36 ユーザーズマニュアル

1. Remove dust from the element with a vacuum 

cleaner, or rinse in cold or lukewarm water. If the 
element is extremely dirty, wash with a neutral 
detergent.

2. After the element has been cleaned, rinse with 

clean running water, allow to dry, then reinstall.

1. Check the prongs and surface of the power cord plug for dust and/or dirt. If 

dust and/or dirt are present, wipe off with a clean dry cloth.

2. Check the power cord, plug and prongs for damage or excess play. If any 

damage or excess play is found, contact your MovinCool reseller for repair.

3. Check the air filters and drain tank.

4. Clean the outside of the unit(s) with a damp cloth or mild nonabrasive cleaner.

1. Operate the unit in FAN ONLY mode for 8 hours.

2. Disconnect the power cord from the AC outlet.

3. Check the prongs and surface of the power cord plug for dust and/or dirt. If 

dust and/or dirt are present, wipe off with a clean dry cloth.

4. Check the power cord, plug and prongs for damage or excess play. If any 

damage or excess play is found, contact your MovinCool reseller for repair.

5. Clean the air filters.

6. Empty all water from the drain tank.