Hatco fshc17wm-0506(1) ユーザーズマニュアル
REMOVING LIME & MINERAL
DEPOSITS
DEPOSITS
1.
Turn the power switch off and unplug the unit
from its power source.
from its power source.
2.
After the unit has cooled down, drain all remaining
water out of the unit. See DRAINING THE
RESERVOIR.
water out of the unit. See DRAINING THE
RESERVOIR.
3.
With pan removed from the unit, fill the pan
with a mixture of water and delimer.
with a mixture of water and delimer.
NOTE: The delimer used should be a safe,
nontoxic, non-corrosive solution. Follow the delimer’s
instruction for proper mixture of water and delimer
solution.
nontoxic, non-corrosive solution. Follow the delimer’s
instruction for proper mixture of water and delimer
solution.
4.
Allow the pan to stand with the mixture
for the recommended period of time. (The time
required will vary depending on the solution used and
amount of deposits in the pan.)
required will vary depending on the solution used and
amount of deposits in the pan.)
5.
After the deliming period, drain the solution
from the pan, and wash thoroughly in sink.
from the pan, and wash thoroughly in sink.
6.
Re-install water pan with the baffle plate
in bottom of unit.
NOTE: When installing the water pan, make sure the
water heating element is laying flat in the water pan,
between the water baffle and is not tilted up.
water heating element is laying flat in the water pan,
between the water baffle and is not tilted up.
7.
Plug the cabinet power cord into its power
source.
source.
NOTE: How often this procedure must be performed
depends on the lime and mineral content of the water
used for daily operation.
depends on the lime and mineral content of the water
used for daily operation.
MAINTENANCE
WARNING
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact the Hatco
Service Department at 800-558-0607 or 414-671-6350;
fax 800-690-2966 or International fax 414-671-3976.
Authorized Hatco Service Agent, or contact the Hatco
Service Department at 800-558-0607 or 414-671-6350;
fax 800-690-2966 or International fax 414-671-3976.
WARNING
This product has no “user” serviceable parts. To avoid
damage to the unit or injury to personnel, use only
Authorized Hatco Service Agents and Genuine Hatco
Parts when service is required.
damage to the unit or injury to personnel, use only
Authorized Hatco Service Agents and Genuine Hatco
Parts when service is required.
WARNING
Genuine Hatco Replacement Parts are specified to
operate safely in the environments in which they are
used. Some aftermarket or generic replacement parts
do not have the characteristics that will allow them to
operate safely in Hatco equipment. It is essential to
use Hatco Replacement Parts when repairing Hatco
equipment. Failure to use Hatco Replacement Parts
may subject operators of the equipment to hazardous
electrical voltage, resulting in electrical shock or burn.
operate safely in the environments in which they are
used. Some aftermarket or generic replacement parts
do not have the characteristics that will allow them to
operate safely in Hatco equipment. It is essential to
use Hatco Replacement Parts when repairing Hatco
equipment. Failure to use Hatco Replacement Parts
may subject operators of the equipment to hazardous
electrical voltage, resulting in electrical shock or burn.
Form No. FSHC17WM-0506
10