Hatco fshc17wm-0506(1) ユーザーズマニュアル

ページ / 16
INSTALLATION
REVERSIBLE ACCESS DOOR
Doors are shipped from the factory mounted on the
cabinet left side, opening from the right. Doors can
be reversed to open from the left, as follows:
1.
Remove screws securing door to hinges.
(See Figure 12.)
2.
Remove the screws securing hinges to cabinet.
3.
Remove screw plugs from right side of cabinet
and insert in left side.
4.
Rotate the door 180° and install on the right side
using the original mounting hardware.
LOCATION
NOTE: The unit must be transported in the upright
position. If laid on its side, water must be drained from
the unit. See DRAINING THE RESERVOIR in the
MAINTENANCE section.
WARNING
For safe and proper operation, the portable
holding cabinet must be located a reasonable
distance from combustible walls and materials. If
safe distances are not maintained,
discoloration or combustion could occur.
CAUTION 
To avoid any injury or damage locate the Holding
Cabinet at the proper counter height, in an area
that is convenient for use. The location should be
level to prevent the unit or its contents from
accidentally falling, and strong enough to support
the weight of the unit and food.
CAUTION
Unit is not weatherproof. For safe and proper
operation locate the unit indoors where the
ambient air temperature is constant and is a
minimum of 70°F (21°C).
CAUTION
The unit must be transported in an upright
position. If laid on its side, the water must be
drained from the unit.
Figure 12. Reversible Access Door
Form No. FSHC17WM-0506
6