Vertex Standard FT-2000 ユーザーズマニュアル
Page 117
FT-2000 O
PERATING
M
ANUAL
052 A1A F-TYPE
Function: Selects the desired keyer operation mode for
the device connected to the front panel’s KEY jack.
Available Values: OFF/buG/ELE/ACS
Default Setting: ELE
the device connected to the front panel’s KEY jack.
Available Values: OFF/buG/ELE/ACS
Default Setting: ELE
OFF: Disables the front panel’s keyer (“straight key”
mode for use with external keyer or computer-
driven keying interface).
driven keying interface).
buG: Mechanical “bug” keyer emulation. One paddle
produces “dits” automatically, while the other
paddle manually produces “dahs.”
paddle manually produces “dahs.”
ELE: Iambic keyer with ACS (Automatic Character
Spacing) disabled.
ACS: Iambic keyer with ACS (Automatic Character
Spacing) enabled.
053 A1A F-REV
Function: Selects the keyer paddle’s wiring configuration
for the KEY jack on the front panel.
Available Values: nor/rEU
Default Setting: nor
for the KEY jack on the front panel.
Available Values: nor/rEU
Default Setting: nor
nor: Tip = Dot, Ring = Dash, Shaft = Ground
rEU: Tip = Dash, Ring = Dot, Shaft = Ground
rEU: Tip = Dash, Ring = Dot, Shaft = Ground
054 A1A R-TYPE
Function: Selects the desired keyer operation mode for
the device connected to the rear panel’s KEY jack.
Available Values: OFF/buG/ELE/ACS
Default Setting: ELE
the device connected to the rear panel’s KEY jack.
Available Values: OFF/buG/ELE/ACS
Default Setting: ELE
OFF: Disables the rear panel’s keyer (“straight key”
mode for use with external keyer or computer-
driven keying interface).
driven keying interface).
buG: Mechanical “bug” keyer emulation. One paddle
produces “dits” automatically, while the other
paddle manually produces “dahs.”
paddle manually produces “dahs.”
ELE: Iambic keyer with ACS (Automatic Character
Spacing) disabled.
ACS: Iambic keyer with ACS (Automatic Character
Spacing) enabled.
055 A1A R-REV
Function: Selects the keyer paddle’s wiring configuration
for the KEY jack on the rear panel.
Available Values: nor/rEU
Default Setting: nor
for the KEY jack on the rear panel.
Available Values: nor/rEU
Default Setting: nor
nor: Tip = Dot, Ring = Dash, Shaft = Ground
rEU: Tip = Dash, Ring = Dot, Shaft = Ground
rEU: Tip = Dash, Ring = Dot, Shaft = Ground
056 A1A CW AUTO
Function: Enables/disables CW keying while operating
on SSB.
Available Values: OFF/50/On
Default Setting: OFF
on SSB.
Available Values: OFF/50/On
Default Setting: OFF
OFF: Disables CW keying while operating on SSB.
50:
50:
Enables CW keying only while operating SSB
on 50 MHz (but not HF).
on 50 MHz (but not HF).
On:
Enables CW keying while operating on SSB (all
TX bands).
TX bands).
N
OTE
:
This feature allows you to move someone from SSB to
CW without having to change modes on the front panel.
CW without having to change modes on the front panel.
057 A1A BFO
Function: Sets the CW carrier oscillator injection side for
the CW mode.
Available Values: USb/LSb/Auto
Default Setting: USb
the CW mode.
Available Values: USb/LSb/Auto
Default Setting: USb
USb: Injects the CW carrier oscillator on the USB side.
LSb: Injects the CW carrier oscillator on the LSB side.
Auto: Injects the CW carrier oscillator on the LSB side
LSb: Injects the CW carrier oscillator on the LSB side.
Auto: Injects the CW carrier oscillator on the LSB side
while operating on the 7 MHz band and below,
and the USB side while operating on the 10 MHz
band and up.
and the USB side while operating on the 10 MHz
band and up.
058 A1A BK-IN
Function: Sets the CW “break-in” mode.
Available Values: SEni/FuLL
Default Setting: SEni
Available Values: SEni/FuLL
Default Setting: SEni
SEni (SEMI): The transceiver will operate in the semi
break-in mode. The delay (receiver re-
covery) time is set by the front panel’s
[DELAY] knob.
covery) time is set by the front panel’s
[DELAY] knob.
FuLL:
The transceiver will operate in the full
break-in (QSK) mode.
break-in (QSK) mode.
059 A1A SHAPE
Function: Selects the CW carrier wave-form shape (rise/
fall times).
Available Values: 1/2/4/6 msec
Default Setting: 4 msec
fall times).
Available Values: 1/2/4/6 msec
Default Setting: 4 msec
060 A1A WEIGHT
Function: Sets the Dot:Dash ratio for the built-in elec-
tronic keyer.
Available Values: (1:) 2.5 ~ 4.5
Default Setting: 3.0
tronic keyer.
Available Values: (1:) 2.5 ~ 4.5
Default Setting: 3.0
M
ENU
M
ODE
MODE-CW G
ROUP