DSC pc1616 ユーザーズマニュアル

The keypad will immediately display all the information programmed when a programming section is entered. Use the arrow keys (< >) 

to scroll through the data being displayed. Scroll past the end of the data displayed, or press the [#] key to exit the section.

Hardware Setup - Local (PC-Link)
Connect an RS-232 to PC-Link Cable between the Computer with DLS Software installed and the alarm panel to be programmed.

Enter the following at a system Keypad to initiate PC-Link:

•

Enter Installers programming [ ][8][Installer Code][499][Installer Code][499]

Any programming section can be viewed from an LED or 

LCD5501Z keypad. When a programming section is entered, the 
keypad will immediately display the first digit of information pro-
grammed in that section.

The keypad displays the information using a binary format, accord-

ing to the following chart:

Press any of the Emergency keys (Fire, Auxiliary or Panic) to 

advance to the next digit. 

When all the digits in a section have been viewed, the panel will exit the section: the Ready light will turn OFF, and the Armed 

light will turn ON, waiting for the next 3-digit programming section number to be entered. 

Press the [#] key to exit the section