DSC pc1616 ユーザーズマニュアル

This section provides the information necessary to program all required features for a basic system as well as common applications. Refer to the 
PC1616/1832/1864 Reference Manual for a complete description of all programmable features.

DSC recommends filling in the Programming Worksheet with the required programming information before programming the system.  This 
will reduce the time required to program and will help eliminate errors.
To enter Installer Programming press [ ][8][Installer Code].  The Program light will FLASH (programmable LCD keypad displays will 
change to ‘Enter Section’).  An error tone indicates the installer code entered is incorrect, Press [#] to clear any key presses and try again.

  The default Installer Code is [5555].

The Armed and Ready lights indicate programming status:

Panel waiting for 3-digit section number
If in module programming, waiting for section # to be entered.

Panel waiting for data to be entered

Panel waiting for HEX data to be entered

  You cannot enter installer programming while the system or any partition is armed or in alarm.

Enter the 3-digit programming section number.:

•

Enter the 3-digit programming section number.  

•

The Armed light will turn OFF and The Ready light will turn ON.  

•

Enter the data written in the boxes.  

For sections that require multiple 2 or 3 digit numbers, the keypad will double-beep after each 2 or 3 digit entry and move to the next item in 
the list.  After the last digit in the section is entered, the keypad will beep rapidly 5 times and exit the program section.  The Ready light will 
turn OFF and the Armed light will turn ON.
For sections that do not require data for every box (such as phone numbers) press the [#] key to exit the program section after entering all the 
required data. The Ready light will turn OFF and the Armed light will turn ON.
At any time the [#] can be pressed to exit any program section.  All changes made up to that point will be saved.

In addition to the standard digits 0-9, HEX digits and special dialer functions can also be programmed if required.

To exit installer programming, press the [#] key when the panel is waiting for a 3-digit section number (the Armed light is ON).  

•

The Armed light will turn OFF and

•

The Ready light will turn ON.  

•

The keypad will display which toggle options are ON or 
OFF according to the chart.

•

To toggle an option ON or OFF, press the corresponding 
number on the keypad.  The display will change accordingly.  

•

When all the toggle options are configured correctly, press 
the [#] key to exit the program section.  

LED 

Zone Light ON

Zone Light OFF

Fixed-Message LCD 

Indicator # ON

Indicator # OFF

Programmable-Message LCD

# Displayed

Dash [-] Displayed

•

The Ready light will turn OFF and the Armed light will turn ON.

HEX (or hexadecimal) digits are sometimes required.  To enter a HEX digit, press 

the [ ] key to begin HEX programming.  The Ready light will FLASH.  Refer to the 
chart below and press the number corresponding to the HEX digit required.  The 
Ready light will continue to FLASH.  Press [ ] again to return to normal decimal 
programming.  The Ready light will turn ON.

Value

Enter

Telephone Dialer 

HEX [A]
HEX [B]
HEX [C]
HEX [D]
HEX [E]
HEX [F]

Press  [ ][1][ ]
Press  [ ][2][ ]
Press  [ ][3][ ]
Press  [ ][4][ ]
Press  [ ][5][ ]
Press  [ ][6][ ]

Not Supported
Simulated [ ] key
Simulated [#] key
Dial tone search
Two second pause
Not Supported