DSC pc1616 ユーザーズマニュアル
PowerSeries - PC1616/PC1832/PC1864
6
[4][2] Trouble Display
Refer to Appendix D – Trouble Conditions, for troubleshooting assistance and a detailed description of all trouble conditions.
[4][3] Alarm Memory Display
The Memory light will be ON if an alarm occurred during the last armed period. Press [4][3]. The Memory light will flash and the keypad
will display the zones that went into alarm.
will display the zones that went into alarm.
: To clear the Memory light, arm then disarm the system.
[4][4] – Door Chime Enable/Disable
Press [4][4]. The keypad will emit 3 rapid beeps if the door chime feature is now enabled and a steady 2-second tone if it is now disabled.
The same function can be performed by pressing and holding the Chime function button for 2 seconds.
The same function can be performed by pressing and holding the Chime function button for 2 seconds.
[4][5] – Program User Codes
The following table identifies available user codes:
Programming User Codes:
LED Keypad:
Press [4][5] followed by the Master Code. The Program light will flash. The keypad will turn ON the corresponding zone light to indicate
a user code is programmed. Enter the 2-digit user to be programmed. The zone light will flash. Enter a new 4 or 6-digit user code or press
[4] to delete the user code. After the user code is programmed or deleted, you may enter another 2-digit user to be programmed or press [#]
to exit.
Press [4][5] followed by the Master Code. The Program light will flash. The keypad will turn ON the corresponding zone light to indicate
a user code is programmed. Enter the 2-digit user to be programmed. The zone light will flash. Enter a new 4 or 6-digit user code or press
[4] to delete the user code. After the user code is programmed or deleted, you may enter another 2-digit user to be programmed or press [#]
to exit.
LCD Keypad:
Press [4][5] followed by the Master Code. The keypad will display the first user (user 01) and include the letter ‘P’ in the bottom, right cor-
ner if the user code is programmed. Scroll to the appropriate user and press the [4] key to program the user (or enter the 2-digit user num-
ber). Enter a new 4 or 6-digit user code or press [4] to delete the user code. After the user code is programmed or deleted, scroll to another
user or press [#] to exit.
Press [4][5] followed by the Master Code. The keypad will display the first user (user 01) and include the letter ‘P’ in the bottom, right cor-
ner if the user code is programmed. Scroll to the appropriate user and press the [4] key to program the user (or enter the 2-digit user num-
ber). Enter a new 4 or 6-digit user code or press [4] to delete the user code. After the user code is programmed or deleted, scroll to another
user or press [#] to exit.
Programming Partition Assignment:
Press [4][5] followed by the Master Code or Supervisor Code. Press [8] followed by the 2-digit user to change to the partition assignment.
The keypad will turn ON the corresponding zone light to indicate which partition(s) the user is assigned to. For example, if zone light 1 is
ON, the user is assigned to partition 1. To change the partition assignment, press the number corresponding to the partition. Once the cor-
rect partitions are assigned to the user, press [#] to exit. To change the partition assignment for another user, press [8] followed by the 2-digit
user number. When finished, press [#] to exit.
The keypad will turn ON the corresponding zone light to indicate which partition(s) the user is assigned to. For example, if zone light 1 is
ON, the user is assigned to partition 1. To change the partition assignment, press the number corresponding to the partition. Once the cor-
rect partitions are assigned to the user, press [#] to exit. To change the partition assignment for another user, press [8] followed by the 2-digit
user number. When finished, press [#] to exit.
Programming User Attributes:
Press [4][5] followed by the Master Code or Supervisor Code. Press [9] followed by the 2-digit user to change to the user attributes. The
keypad will turn ON the corresponding zone light to indicate which attributes are assigned to the user.
keypad will turn ON the corresponding zone light to indicate which attributes are assigned to the user.
Light [1]
For Future Use
Light [2]
For Future Use
Light [3]
User can manually bypass zones
Light [4]
User can access the Escort5580 module remotely
Light [5]
For Future Use
Light [6]
For Future Use
Light [7]
The panel will squawk the bell output when the user arms/disarms
Light [8]
One-time use code – the code will be erased after it is used to arm/disarm the system
To change the user attributes, press the number corresponding to the attribute. Once the correct attributes are assigned to the user, press [#]
to exit. To change the user attributes for another user, press [9] followed by the 2-digit user number. When finished, press [#] to exit.
to exit. To change the user attributes for another user, press [9] followed by the 2-digit user number. When finished, press [#] to exit.
Code
Type
Function
[01] – [32]
[33] – [34]
[40]
[41] – [42]
[33] – [34]
[40]
[41] – [42]
General User Codes
Duress Codes
Master Code
Supervisor Codes
Duress Codes
Master Code
Supervisor Codes
arm, disarm
transmit duress reporting code
all functions
arm, disarm, program user codes
transmit duress reporting code
all functions
arm, disarm, program user codes