FMI pfs us gwrp16c ユーザーズマニュアル

125311-01A

18

We also recommend that you keep the burner 

tube and pilot assembly clean and free of dust 

and dirt. To clean these parts we recommend 

using compressed air no greater than 30 PSI. 

Your local computer store, hardware store or 

home center may carry compressed air in a 

can. If using compressed air in a can, please 

follow the directions on the can. If you don’t 

follow directions on the can, you could dam-

age the pilot assembly.
1.  Shut off unit, including pilot. Allow unit to 

cool for at least thirty minutes.

2.  Inspect burner, pilot and primary air inlet 

holes on orifice holder for dust and dirt 

(see Figure 30).

3.  Blow air through the ports/slots and holes 

in the burner.

4.  Never inset objects into the pilot tube.
5.  Blow air into the primary air holes on the 

orifice holder.

Clean pilot assembly also. A yellow tip on the 

pilot flame indicates dust and dirt in the pilot 

Pilot 

Assembly

Pilot Air 

Inlet Hole

Use pressurized air to clean.
Exterior

Use a soft cloth dampened with a mild soap 

and  water  mixture.  Wipe  the  cabinet  to  re-

move dust.

•   Natural Gas Only

•   18,000 Btu/h

•   Pressure Regulator Setting: 6" W.C.

•   Inlet Gas Pressure* (in. of water):

  Maximum - 10.5" W.C., Minimum - 7" W.C.

•   Natural Gas Only

•   30,000 Btu/h

•   Pressure Regulator Setting: 6" W.C.

•   Inlet Gas Pressure* (in. of water):

  Maximum - 10.5" W.C., Minimum - 7" W.C.

•   Natural Gas Only

•   6,600/12,000/18,000 Btu/h

•   Pressure Regulator Setting: 6" W.C.

•   Inlet Gas Pressure* (in. of water):

  Maximum - 10.5" W.C., Minimum - 7" W.C.

•   Natural Gas Only

•   6,600/18,000/30,000 Btu/h

•   Pressure Regulator Setting: 6" W.C.

•   Inlet Gas Pressure* (in. of water):

  Maximum - 10.5" W.C., Minimum - 7" W.C

•   Propane/LP Gas Only

•   16,000 Btu/h

•   Pressure Regulator Setting: 8" W.C.

•   Inlet Gas Pressure* (in. of water):

  Maximum - 14" W.C., Minimum - 11" W.C.

•   Propane/LP Gas Only

•   26,000 Btu/h

•   Pressure Regulator Setting: 8" W.C.

•   Inlet Gas Pressure* (in. of water):

  Maximum - 14" W.C., Minimum - 11" W.C.

•   Propane/LP Gas Only

•   6,000/11,000/16,000/ Btu/h

•   Pressure Regulator Setting: 8" W.C.

•   Inlet Gas Pressure* (in. of water):

  Maximum - 14" W.C., Minimum - 11" W.C.

•   Propane/LP Gas Only

•   6,000/16,000/26,000 Btu/h

•   Pressure Regulator Setting: 8" W.C.

•   Inlet Gas Pressure* (in. of water):

  Maximum - 14" W.C., Minimum - 11" W.C.

* For purposes of input adjustment.

assembly. There is a small pilot air inlet hole 

about 2" from where the pilot flame comes out 

of the pilot assembly (see Figure 30). With the 

unit off, lightly blow air through the air inlet 

hole. You may blow through a drinking straw 

if compressed air is not available.