Zebra 49834 ユーザーズマニュアル

96

170PAX4 Maintenance Manual

57518L-001 Rev. A

3/18/05

Print Server LCD Displays

The menu options shown in 

 display only if you have a print server installed.

This parameter, which serves the same function as the 

^NP

 ZPL 

command, specifies whether to use the print engine’s or the print server’s 
IP settings at bootup.

• Press the right or left oval to display other choices.

Default: PRINTER

Selections: PRINTER, PRINTSERVER

This parameter, which serves the same function as the 

^NB

 ZPL 

command, tells the print engine whether to search for a wired print server 
at bootup.

• Press the right or left oval to display other choices.

Default: NO

Selections: YES, NO

Allows either the user (permanent) or the server (dynamic) to select the 
IP address. If a dynamic option is chosen, this selection determines the 
method(s) by which the print server (wired or wireless) receives the IP 
address from the server.

• Press the right or left oval to display other choices.

Default: ALL

Selections: ALL, GLEANING ONLY, RARP, BOOTP, DHCP, 
DHCP AND BOOTP, PERMANENT

Use of GLEANING ONLY is not recommended when the 

Wireless Print Server is installed.

This parameter allows you to select the IP address if PERMANENT was 
chosen in IP PROTOCOL. (If a dynamic option was chosen, the user 
cannot select the address.)

Press the left oval to move to the next digit position.

Press the right oval to increase the value of the digit.

1 Appears only when the ZebraNet Wireless Print Server is installed.

2 These parameters appear after the system recognizes the existence of a ZebraNet print server (wired or wireless). After the 

print server is recognized, all zeroes (000.000.000.000) will display until the print engine obtains an IP address or defaults 
to address 192.168.254.254.

3 If a wireless password is set, you must enter the wireless password (not the print engine password) to access this parameter.

4 This parameter appears 1) when no wireless card is inserted or 2) when the wireless card is associated to the WLAN and the 

card supports LEAP.

LOAD LAN FROM?
PRINTER

WIRED PS CHECK?
NO

IP PROTOCOL

ALL

IP ADDRESS

000.000.000.000