Zebra 49834 ユーザーズマニュアル
98
170PAX4 Maintenance Manual
57518L-001 Rev. A
3/18/05
Operations
Print Server LCD Displays
Select Encryption Index
1,3
• Press the right or left oval to display other choices.
Default: 1
Selections: 1, 2, 3, 4
Reset Network
2,3
This option resets the wireless card and the print server when the wireless
option is running. Selecting this option has no effect when the wireless
option is not running, when there is no card inserted, or when the wireless
password is anything other than the default (zero).
option is running. Selecting this option has no effect when the wireless
option is not running, when there is no card inserted, or when the wireless
password is anything other than the default (zero).
1.
Press the right oval to select
YES
.
The LCD prompts
ARE YOU SURE?
.
• Press the left oval to select
NO
to cancel the request.
• Press the right oval to select
YES
and reset the network.
Table 9 • Print Server Parameters (Continued)
Parameter
Action/Explanation
1 Appears only when the ZebraNet Wireless Print Server is installed.
2 These parameters appear after the system recognizes the existence of a ZebraNet print server (wired or wireless). After the
print server is recognized, all zeroes (000.000.000.000) will display until the print engine obtains an IP address or defaults
to address 192.168.254.254.
to address 192.168.254.254.
3 If a wireless password is set, you must enter the wireless password (not the print engine password) to access this parameter.
4 This parameter appears 1) when no wireless card is inserted or 2) when the wireless card is associated to the WLAN and the
card supports LEAP.
ENCRYPT. INDEX
1
1
RESET NETWORK
YES
YES