Lowrance lmf-400 ユーザーズマニュアル
24
Quad Analog. Pressure Range can make on-screen gauges easier to
read by allowing you to select a range that will better fit your vessel’s
pressure range. If, for example, your vessel's water pressure range is 0-
30 PSI, the unnecessary figures (31-100 PSI) will only crowd the gauge
display, making it harder to read. Using the Pressure Range feature
allows you to eliminate unnecessary figures from the display, giving it
better resolution.
To set Pressure Range:
1. With the single analog, dual analog, quad analog, synchronization
To set Pressure Range:
1. With the single analog, dual analog, quad analog, synchronization
page on the screen, press
MENU
, use the
UP
and
DOWN
keys to select
S
YSTEM
S
ETUP
and press
ENTER
.
2. Highlight
P
RESS
R
ANGES
(Pressure Ranges) and press
ENTER
, which
will open the Pressure range menu with the following options: Eng Wtr
Press (Engine Water Pressure), Eng Oil Press (Engine Oil Pressure),
Fuel Pressure, Eng Bst Press (Engine Boost Pressure) and Trns Oil
Press (Transmission Oil Pressure).
3. Select the desired pressure category and press
3. Select the desired pressure category and press
ENTER
. A menu will
appear with these options: 0-15 PSI, 0-30 PSI, 0-60 PSI, 0-80 PSI, 0-
100 PSI.
4. Highlight the desired pressure range and press
4. Highlight the desired pressure range and press
ENTER
. You will be
taken back to the main display.
Change Units
The
Change Units
The
C
HANGE
U
NITS
feature allows you to change the units of measure for
the following options: Speed/Distance,
Temperature,
Pressure,
Depth,
GPS Coordinates and Volume.
System Setup menu (left) with Change Units highlighted. The Change
Units menu (right) with Speed/Distance selected.
To change Speed and Distance units:
Choosing Speed and Distance from the Change Units menu will allow
you to set the unit of measure for speed and distance to Statute,
Nautical or SI (Metric).