Panasonic KXFLB813FX 操作ガイド
1. Introduction and Installation
20
2
Insert the paper, print-side down (
1) until
the unit grasps the paper and a single beep
is heard.
is heard.
L
Adjust the width of the guides (
2) to the
size of the recording paper.
Note:
L
If the paper is not inserted correctly, re-adjust
the paper, or the paper may jam.
the paper, or the paper may jam.
L
Make sure the unit grasps the recording
paper as specified in step 2. The display
shows the following.
paper as specified in step 2. The display
shows the following.
PAPER IN TRAY #2
FOR PC PRINTING
FOR PC PRINTING
1.9 Handset unit
1
Connect the handset cord (
1) to the
handset and the handset cradle.
2
Connect the handset connecter (
1) to the
handset unit connection jack (
2).
3
Insert the tab (
1) into the slot (2) on the unit
and insert the rib (
3) of the handset cradle
into the bottom groove (
4).
To remove the handset unit
1. Pull the handset unit slightly forward (
1),
and then remove the rib of the handset cradle
by lifting the handset unit in the direction of
the arrow (
by lifting the handset unit in the direction of
the arrow (
2).
1
2
1
1
2
4
3
2
1
1
2
FLB803_813FX-PFQX2567ZA-en.book Page 20 Thursday, March 30, 2006 3:25 PM