DJI Phantom 3 Standard (Factory Refurbished) オーナーマニュアル
©
2015 DJI. All Rights Reserved.
11
Aircraft
Phantom 3 Standard
User Manual
Aircraft Status Indicator Blinking Patterns
Normal
Flashes red, green and yellow alternatively Turning on and running self-diagnostic test
Flashes green and yellow alternatively
Warming up
Flashes green slowly
Safe to Fly (P-Mode with strong GPS signal)
Flashes yellow slowly
Safe to Fly (A-mode but No GPS signal)
Warning
Flashes yellow quickly
Remote controller's signal lost
Flashes red slowly
Low Battery Warning
Flashes red quickly
Critical Battery Warning
Flashes red (Alternates with other patterns)
IMU error
— Glows solid red
Critical error
Flashes red and yellow alternatively
Compass calibration required
Return-to-Home (RTH)
The Return-to-Home (RTH) procedure brings the aircraft back to the last recorded Home Point. There are
three types of RTH procedures: Smart RTH, Low Battery RTH, and Failsafe RTH. The following sections
describe them in detail.
GPS
Description
Home Point
The Home Point is the location at which the aircraft takes off. A
strong GPS signal (
) must be present for the aircraft to record
the Home Point. If the Home Point is recorded successfully, the
Aircraft Status Indicator will blink green rapidly.
Smart RTH
Tap in the DJI GO app or toggle the S2 switch on the remote controller back and forth at least twice
to initiate Smart RTH. The aircraft will first ascend to the Return-to-Home altitude, then return to the last
recorded Home Point if a GPS signal is available. During the RTH procedure, you may use the remote
controller to guide the aircraft around obstacles.
Tap or toggle the S1 switch once to terminate Smart RTH and regain full control of the aircraft.