Cobra HH 500 FLT BT オーナーマニュアル
VHF Marine Radio Protocols
Operating Your Radio
35
Nothing Comes Close to a Cobra
®
Advanced Operation
Memory Location Mode
Your radio has unlimited memory locations for storing your
most frequently used channels. These memory locations can
be selected individually or can be scanned. (See page 37
under Memory Location Scan.)
most frequently used channels. These memory locations can
be selected individually or can be scanned. (See page 37
under Memory Location Scan.)
To enter Memory mode, press MEM/ESC button. The display
will show the MEM icon and the Memory Channel bank will
be displayed on the matrix.
will show the MEM icon and the Memory Channel bank will
be displayed on the matrix.
To Program Memory Locations:
1. Press and hold the MEM/ESC button for two (2)
seconds. The memory location number will be
displayed on the matrix and the MEM icon will be
turned On.
displayed on the matrix and the MEM icon will be
turned On.
2. Use the Channel Up/Down button to advance to the
memory location (00-99) you want to program.
3. Press the MEM/ESC button to select the memory
location.
4. Use the Channel Up/Down button to change to the
channel you want to store into the selected memory
location.
location.
5. Press the MEM/ESC button to program that channel.
The memory location will be displayed on the matrix
again.
again.
Repeat steps 2 through 5 to program as many
additional memories as you want.
additional memories as you want.
6. Press and hold the MEM/ESC button for two (2)
seconds. This will return the radio to Memory mode.
7. Press and release the MEM/ESC button again to
return to Marine Standby mode.
CAN
H M L
ESC
MEM
ENT SETUP
MEM/ESC Button
MEM
SAME
ATIS
VOX
LO
MEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Memory Location Number
ENT SETUP
CALL
MARINE HH50
Channel Up/Down Buttons
MEM
SAME
ATIS
VOX LOMEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
Channel Number
VHF Marine Radio Protocols
Operating Your Radio
34 English
Advanced Operation
To Recall a Stored Memory Location:
1. Press the MEM/ESC button. The MEM icon will be
turned On.
2. Press the Channel Up/Down button to select the
memory location. If a memory location has been
programmed, its associated channel will display on
the LCD. Your radio is now in Marine Standby mode
on the selected memory location.
programmed, its associated channel will display on
the LCD. Your radio is now in Marine Standby mode
on the selected memory location.
To Exit Memory Location Mode:
Press the MEM/ESC button to return the radio to
Marine Standby mode. The last channel used in
Marine Standby mode will now be displayed on the
LCD and the MEM icon will disappear.
Marine Standby mode. The last channel used in
Marine Standby mode will now be displayed on the
LCD and the MEM icon will disappear.
To Erase Stored Memory Locations:
1. Press and hold the MEM/ESC button for two (2)
seconds. The memory location number will be
displayed on the matrix and the MEM icon will be
turned On.
displayed on the matrix and the MEM icon will be
turned On.
2. Use the Channel Up/Down button to advance to the
memory location you want to erase.
3. Press the MEM/ESC button to select the memory
location.
4. Use the Channel Up/Down button to change to the
channel to read “00” at the selected memory
location.
location.
5. Press the MEM/ESC button to erase that channel.
Repeat steps 2 through 5 to erase as many additional
memories as you want.
memories as you want.
6. Press and hold the MEM/ESC button for two (2)
seconds. This will return the radio to Memory mode.
7. Press and release the MEM/ESC button again to
return to Marine Standby mode.
MEM
SAME
ATIS
VOX
LO
MEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
MEM Icon