Cobra HH 500 FLT BT オーナーマニュアル

Nothing Comes Close to a Cobra

®

During Channel Scan mode, the radio will rapidly switch
from channel to channel through all the channels. 

NOTE
The radio must be squelched for Channel Scan mode

to function. See page 18 for Squelch procedure.

1. From Marine Standby mode, press the SCAN button.

The radio will immediately begin to scan the entire
channel map selected in the active channel map. 
CHANNEL SCAN will display on the matrix.

2. A signal on any channel will stop the scan for 10

seconds to allow you to listen to the traffic on that
location. After 10 seconds, the radio will resume
scanning.

3. Press the Channel Up/Down button to resume

scanning before the 10-second pause has completed
or to change the scan direction.

4. To EXIT Channel Scan mode, press the SCAN button

again. The SCAN icon will disappear from the LCD
and the radio will return to Marine Standby mode.

During Memory Location Scan mode, the radio will rapidly
scan through all pre-assigned memory channels.

NOTE
The radio must be squelched for Memory Location

Scan mode to function. See page 18 for Squelch
procedure.

NOTE
If there are fewer than two (2) memory locations

programmed in the radio, the Memory Location Scan
option will not be available. To program at least two
(2) memory locations, see page 34.

1. From Marine Standby mode, press the MEM/ESC

button.

2. Press the SCAN button. The radio will immediately

begin to scan all pre-assigned memory channels.
The MEM icon will show on the LCD, and MEM
CHAN SCAN will display on the matrix along with the
memory location.

3. A signal on any channel will stop the scan for 10

seconds to allow you to listen to the traffic on that
location. After 10 seconds, the radio will resume
scanning.

4. Press the Channel Up/Down button to resume

scanning the Memory Location Scan channels
before the 10-second pause has completed or to
change the scan direction.

5. To EXIT Memory Location Scan mode, press the

SCAN button again. The MEM icon will disappear
from the LCD and the radio will return to Marine
Standby mode.