Cobra HH 500 FLT BT オーナーマニュアル

Nothing Comes Close to a Cobra

®

Use the Cobra exclusive Rewind-Say-Again

feature to replay

or record the last 20 seconds of an incoming audio
transmission.

When engine noise, music or conversation creates too
much noise to hear an inbound message clearly, press
the REW button to hear the message a second time.

When listening to an urgent distress message of an
excited caller with confusing background noise, press
the REW button to hear the message a second time and
get life saving information. Use this feature to record call
details including position coordinates, call signs,
registration numbers and store details that will help
authorities locate the distressed vessel.

NOTE
Hold the Rewind button to lock the recording memory

(the Rewind icon flashing) and save the currently
recorded transmission.

1. Press REW button to listen to 20 seconds of the last

recorded audio transmission. The matrix will display
REWIND PLAYBACK during the playing back of the
message and a 20-second countdown begins in the
lower right corner. 

2. Press the TALK, REW or MEM/ESC button during

playback to stop the playback transmission. The radio
returns to Marine mode.

NOTE
If the record memory is locked (rewind icon flashing),

press and hold the REW button to unlock.

1. Press and hold SCAN button for two (2) seconds to

enter Record mode. The matrix will display MIC
RECORDER.

2. Press and hold PTT button to begin recording 

from radio microphone. The transmitter will turn off.
The matrix will display MIC RECORDER ON and the
seconds remaining will be shown in the lower right
corner. If PTT button is released, recording stops.
While recording, a 20-second countdown begins on
display. When 20-second countdown time has ended,
recording stops and two (2) beep tones will be heard.

3. Press and hold SCAN button again for two (2)

seconds or press MEM/ESC button to cancel
recording and return to last operation.