RACAM - TECH LTD 1014401 ユーザーズマニュアル
Operating the System
22
SET ALARM
-Hours- -Min-
00 00
Alarm Off
-Hours- -Min-
00 00
Alarm Off
3.
Input the desired alarm time.
Such setting will cause the TU (if power turned off) to wake up at the chosen alarm
time and at that time cause the TU to send the wakeup command to the RCUs. The
RCUs will go into Standby state, with the red LED blinking.
Firing Procedure
Note:
If the TU is turned off, start-up the system as described
in "System Start-Up" on page 16. If the TU is turned on, press Esc
until the main settings menu is displayed.
until the main settings menu is displayed.
1.
On the main settings menu, select EVENTS CONTROL. The EVENTS
CONTROL screen will be displayed:
1.SELECT EVENT
2.PROGRAM EVENT
3.CLEAR EVENT
4.CHOOSE EVENT
3.CLEAR EVENT
4.CHOOSE EVENT
2.
Select SELECT EVENT from the EVENTS CONTROL menu. The
SELECT EVENT screen will be displayed:
SELECT EVENT
Choose event
from 1 to 8
1
Choose event
from 1 to 8
1
3.
Here you can choose 8 different events for each of the Manual, Semi-
automatic and Automatic modes. You can select between 8 events
programmable on the Memory Key by pressing a Numeric Programming Key.
programmable on the Memory Key by pressing a Numeric Programming Key.
4.
Press Esc to return to the EVENTS CONTROL menu.
5.
From the EVENTS CONTROL menu, select CHOOSE EVENT. The
following screen will be displayed:
1.AUTO
2.S-AUTO
3.MANUAL
2.S-AUTO
3.MANUAL