RACAM - TECH LTD 1014401 ユーザーズマニュアル
Operating the System
23
Now you have chosen the specific event for fireworks display.
Arming the system
Arming the system
Press the READY button. The display will count down 7 seconds. During this time
the command LEDs will be in the following condition:
Key LED
the command LEDs will be in the following condition:
Key LED
Color
Send Red
Ready Red
Hold Green
Group Green
After elapsing of the 7 seconds, the command LEDs will be in the following
condition:
Key LED
Ready Red
Hold Green
Group Green
After elapsing of the 7 seconds, the command LEDs will be in the following
condition:
Key LED
Color
Send Green
Ready Red
Hold Green
Group Green
This indicates that the TU has sent the arming command to the RCUs. On the RCUs,
the green light will blink. This indicates that the RCUs are in armed state.
WARNING: The system is in armed state. If the PTT will be pressed and the
SEND button will be pressed when in semi-automatic or automatic mode, the
system will fire. In manual mode, if the PTT will be pressed and any of the
active 1-16 command buttons (as indicated by the command key LED's lighting
green) will be pressed, the system will fire
Ready Red
Hold Green
Group Green
This indicates that the TU has sent the arming command to the RCUs. On the RCUs,
the green light will blink. This indicates that the RCUs are in armed state.
WARNING: The system is in armed state. If the PTT will be pressed and the
SEND button will be pressed when in semi-automatic or automatic mode, the
system will fire. In manual mode, if the PTT will be pressed and any of the
active 1-16 command buttons (as indicated by the command key LED's lighting
green) will be pressed, the system will fire
.
Firing in Manual Mode
1.
The display will be as follows:
20:17:10
EVENT:1 GROUP:1
MODE: MANUAL
EVENT:1 GROUP:1
MODE: MANUAL
2.
Choose the Group according to your preference. You can increment the
group number by 1 by pressing the Group key. When current Group number is
16, pressing on the Group key will bring you to Group 1.
16, pressing on the Group key will bring you to Group 1.
3.
Press the PTT and press any of the active command keys. The firework
will fire. Any RCU that has functioned will shut down automatically. The
command key LED of any fired unit will turn from green to red.
command key LED of any fired unit will turn from green to red.