SmartSight Networks Inc MF24 ユーザーズマニュアル
29
_____________________________________________________________________________________________
Microflex AV/ADV/AVr/ADVr North-American user’s manual / Rev 1.4
• Options
Serial Port:
Displays the communication port configuration window.
• Help
Release Notes:
Displays the special notes related to the actual software
release.
release.
4.3.4 Tool Bar
The Tool Bar contains the four most important operations listed in the previous
section: Download, Upload, Diagnostics and Firmware Update. Please refer to
the appropriate section for additional information on those functions.
section: Download, Upload, Diagnostics and Firmware Update. Please refer to
the appropriate section for additional information on those functions.
Figure 16 – MNM Tool Bar
4.4 Unit Properties
This section explains the different configuration items displayed in the four property
tabs.
4.4.1 General
• Serial Number (read-only)
This property displays the module’s embedded serial number. It is an exclusive
and read-only 12-digit number.
and read-only 12-digit number.
• Module ID (read-write)
An exclusive number, between 1 and 254, must be assigned to each module.
____________________________________________________________________________
All modules MUST have an exclusive and valid Module ID for normal network operation.
If you change the ID of a module in a network and download the network information
immediately after, not all network nodes may appear in the tree list. This is because the
Master node in the network may take up to 30 seconds to refresh, within its memory, the
new network architecture.
If you change the ID of a module in a network and download the network information
immediately after, not all network nodes may appear in the tree list. This is because the
Master node in the network may take up to 30 seconds to refresh, within its memory, the
new network architecture.
____________________________________________________________________________