Arescom Inc. ND1760 ユーザーズマニュアル
SOFTWARE INSTALLATION & CONFIGURATION
SOFTWARE INSTALLATION & CONFIGURATION
13
Step 4. Check to see if
Internet Protocol
(TCP/IP) is listed
under Network
Components.
A. If you do not see
(TCP/IP) is listed
under Network
Components.
A. If you do not see
TCP/IP listed
under Network
Components, you
have not installed
TCP/IP. Repeat
steps 1 - 4.
under Network
Components, you
have not installed
TCP/IP. Repeat
steps 1 - 4.
B. If you see TCP/IP listed under Network Components, you
already have TCP/IP on your Windows 2000. Proceed to the
section titled “
section titled “
”.
Configuring TCP/IP in Windows
®
2000
Step 1. From the General tab in the Local Area Connection Properties
window, select Internet Protocol (TCP/IP) listed under Network
Components and click Properties.
Components and click Properties.
To enable dynamic IP addressing:
Step 1. Click the radio button next
to Obtain an IP Address
automatically.
automatically.
OPTIONAL: You can either click
Obtain DNS server address
automatically or Use the
following DNS server addresses
options. If you choose the Use the
following DNS server addresses
option, then you need to enter the
Preferred and Alternate DNS
server IP addresses.
Obtain DNS server address
automatically or Use the
following DNS server addresses
options. If you choose the Use the
following DNS server addresses
option, then you need to enter the
Preferred and Alternate DNS
server IP addresses.
Step 2. Click OK to exit the
Internet Protocol (TCP/IP) Properties window. Proceed to the
next section titled “
next section titled “
.”