IKUSI ELECTRONICA S.L. RAD-TF ユーザーズマニュアル
RADS11 and RADF13 Users Manual ver0.4a.doc
KCI Hoists Corp. reserves the right to modify this information without prior notification.
KCI Hoists Corp. reserves the right to modify this information without prior notification.
Page 20 of 23
7.4.2 RECEIVER
In WORKING mode, the 5 green LEDs should light as described in Starting-up procedure. If
this is so, press the transmitter manoeuvre buttons and observe the response of the output
relays. If the response is normal, the problem is not related to the remote control equipment and
the installation must be checked. If any of the relays is not activated, the problem is associated
with the remote control equipment.
LED COLOUR
ON
FLASHING
ON
OFF
SIGNAL Green
-
Own or more Radio
Systems sharing the
own channel
Systems sharing the
own channel
Receiver doesn’t
receive any RF signal.
receive any RF signal.
POWER Green
Power supply OK
-
Power supply NOTOK
HARD
OK
OK
Green
Board OK
Slow: Failure in board.
Fast: EEPROM error
Fast: EEPROM error
Failure in board
ID
Green
-
ID Code OK
Not recognised ID
Code
Code
DATA
Green
-
Own or other valid
messages are presents
messages are presents
No correct messages
are being received.
are being received.
If the problem is associated with the equipment, please send both the transmitter and the
receiver to the your Technical Assistance Service, together with a description of the problem
and the status of the LEDs.