IKUSI ELECTRONICA S.L. RAD-TF ユーザーズマニュアル

 

 

 

 
The systems RADS11 / RADF13 remote control sets are guaranteed for a period of up to one 
year after the date of delivery. This guarantee covers repairs and the replacement of defective 
pieces at our Technical Service Department. Both the transmitter and receiver will be necessary 
if any repairs or replacements need to be carried out. 
 
The guarantee does not cover damage resulting from the following: 
 

 transport, 
 incorrect installation, 
 repairs or alterations made to the equipment by personnel other than authorized, 
 obvious misuse or incorrect maintenance of the equipment. 

 
Our Technical Service reserves the right to evaluate break-downs and damage. 
 
Under no circumstances the manufacturer will be held responsible for hold-ups at work, 
accidents or expenses incurred as a result of equipment malfunctioning. 
 
 

 
This equipment is designed for use in an industrial environment. However, we recommend you 
follow the instructions below to extend the life span of your remote control set: 
 

 Use the strap provided with the transmitter to prevent the transmitter from falling. 
 Do not clean the transmitter with solvents or pressurised water. Use a damp cloth or soft 

brush. 

 Use and recharge the battery regularly. 
 Check every day that the STOP button is working. 
 Disconnect the receiver cables if soldering/welding work is going to be carried out on the 

crane. 

 

RADS11 and RADF13 Users Manual ver0.4a.doc 
KCI Hoists Corp.  reserves the right to modify this information without prior notification. 

Page 18 of 23