Wilson Electronics LLC 460005 ユーザーズマニュアル

ENGLISH

The Signal Boost includes four indicator 

lights, one for each band (see FAQ for 

explanation of MHz bands). Each indicator 

light will either be green, orange or red.

Band 5
Band 2

Green indicates that the booster is 

powered and operating at maximum 

gain. 

 Solid  Red indicates that the booster 

has shut off on the associated 

frequencies to prevent oscillation 

(feedback). 

 Solid  Orange indicates that the 

booster has shut off on the associated 

frequencies due to close proximity of 

a cell tower. 

 Green/Orange  Blinking indicates 

that the booster is operating at a 

reduced gain due to close proximity of 

a cell tower. 

 Green/Red  Blinking indicates that 

the booster is operating at a reduced 

gain to prevent oscillation (feedback).

Note: All red light issues must be resolved 

before orange light issues. 
Fixing Red Light Issues 
If one or more lights on the Signal Boost 

are red: 
1.  Make sure all connections are tight. 
2.   Increase the distance between the 

outside antenna and the inside 

antenna, by moving them horizontally 

and/or vertically farther apart until the 

light(s) change to green. 

3.   Follow the same steps for a green/red 

blinking light until the light goes solid 

green.

4.   If more separation is not possible 

and the coverage of the booster is 

too small with a green/red blinking 

light indicating reduced gain, contact 

weBoost Customer Support Team for 

assistance: 866-294-1660. 

Fixing Orange Light Issues 
If one or more lights on the Signal Booster 

are orange: 
1.   Move the Outside Antenna away from 

the strongest cellular signal in small 

increments until the light turns green 

or green/orange blinking.

 

Inside area needing increased signal 

Inside area needing increased signal 

2.   If the light remains orange, or if the 

green/orange blinking light indicating 

reduced gain is not providing 

enough coverage area, contact the 

weBoost Customer Support Team for 

assistance: 866-294-1660.

Lights Off 
If one or more of the lights on the Signal 

Booster are off verify power to your surge 

protected power strip.

NOTE: The Signal Booster can be reset by 

disconnecting and reconnecting the power 

supply. 
For additional descriptions on 

troubleshooting, see the install video at 

weboost.com/us/Connect3Gvideo .