Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Netgear
  4. 10300138
  5. ユーザーズマニュアル

Netgear 10300138 ユーザーズマニュアル

ダウンロード
ページ / 93
30
   
|    
Chapter 3.  Management 
 
ProSafe Wireless-N Access Point WNAP320 Reference Manual 
Enabling the Syslog Server
The Syslog screen allows you to enable the syslog option if you have a syslog server on your 
LAN.
To enable a syslog server:
1. 
Select Configuration > System > Advanced > SysLog to display the Syslog screen. 
See 
Figure 9. 
2. 
Enable Syslog
. Enable this option if you have a syslog server on your LAN. If this feature is 
enabled, you must enter the IP address of your syslog server and the port number your 
SysLog server is configured to use. The default is disabled.
3. 
Syslog Server IP Address
.The access point will send all the syslog file to the specified IP 
address if syslog option is enabled. The default is 0.0.0.0.
4. 
Port Number
. The port number configured in the syslog server on your LAN. The default is 
514.
5. 
Click Apply to save your syslog settings.