Netgear 10300138 ユーザーズマニュアル
32
|
Chapter 3. Management
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Viewing General Summary Information
The System screen, under the Monitoring tab provides a summary of the current WNAP320
configuration settings, including current IP settings and current wireless settings. This
information is read only, so any changes must be made on other screens.
configuration settings, including current IP settings and current wireless settings. This
information is read only, so any changes must be made on other screens.
To access the System screen:
1.
Select Monitoring > System view the System screen, shown in
. This screen
:
Table 1. System Information Fields
Field
Description
Access Point Information
Access Point Name
Indicates the NetBIOS name. The default name can be changed, if you
wish.
wish.
MAC Address
Displays the Media Access Control address (MAC address) of the product
family’s Ethernet port.
family’s Ethernet port.
Country/Region
Displays the domain or region for which the product family is licensed for
use. It might not be legal to operate this product family in a region other than
one of those identified in this field.
use. It might not be legal to operate this product family in a region other than
one of those identified in this field.
Firmware Version
The version of the firmware currently installed.
Access Point Mode
Identifies the operating mode of the WNAP320: Access Point, Point-to-point
bridge, Point-to-point bridge with Access Point, Multi-point bridge, or
Repeater.
bridge, Point-to-point bridge with Access Point, Multi-point bridge, or
Repeater.
Current IP Settings
IP Address
The IP address of the product family.
Subnet Mask
The subnet mask for the product family.
Default Gateway
The default gateway for the product family communication.
DHCP Client
Enabled indicates that the current IP address was obtained from a DHCP
server on your network. Disabled indicated a static IP configuration.
server on your network. Disabled indicated a static IP configuration.
Current Wireless Settings for 802.11n/g
Operating Mode
Identifies the 802.11 operating mode of the WNAP320.
Channel/Frequency
Identifies the channel the wireless port is using. 11 is the default channel
setting. Channel frequencies used on each channel can be found in the
article,
setting. Channel frequencies used on each channel can be found in the
article,
A.
Rogue AP Detection
Identifies whether the Rogue AP detection feature is enabled or disabled.