Netgear 10300138 ユーザーズマニュアル
34
|
Chapter 4. Advanced Configuration
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Configuring the WNAP320 for Client Mode
In Client mode the WNAP320 operates as a client bridge only and sends traffic to the
selected remote AP or peer device. To configure the WNAP320 for Client mode:
selected remote AP or peer device. To configure the WNAP320 for Client mode:
1.
Select Configuration > Wireless Bridge > Bridging and Repeating. The Bridging and
Repeating screen displays. See
Figure 11.
Select the Enable Wireless Bridgeing and Repeating check box. This allows you to
select a bridging mode.
select a bridging mode.
2.
Select Client. You can now enable the MAC Clone feature. The default is Disable. If you
.
3.
Click Apply.
Figure 12.