VESSCO inc TX-300F ユーザーズマニュアル
5
EXAMPLE 1
Store telephone number 714-3334 in memory location 1.
Press: 7 + 1 + 4 + 3 + 3 + 3 + 4 + ME + 1
EXAMPLE 2
Store telephone number 82-2-714-9609 in memory location 2.
Press: 8 + 2 + 2 + 7 + 1 + 4 + 9 + 6 + 0 + 9 + ME + 2
To store pager numbers
1. In the PROGRAM mode.
2. Insert PASS NUMBER (Default “0000”) and press # button.
3. Press all of the digits of first pager number. The LCD will display
2. Insert PASS NUMBER (Default “0000”) and press # button.
3. Press all of the digits of first pager number. The LCD will display
every number is pressed.
4. Press and hold sharp button (#) 2 seconds after all digits have
been entered.
5. A “dash” will appear on the LCD to indicate that the dialer will
pause approximately 2 seconds to allow the pager time.
6. Input the numeric code desired for the pager directly after the
pause. (This number will appear on the pager unit)
7. Momentarily press M E (MEMORY) Button and then the “1” key.
This number is now stored in memory location 1.
8. Repeat this process for memory location 2, 3, 4, 5, 6, 7, 8, and 9, if
you need.
EXAMPLE
Store pager number 714-3334 and numeric message 911 in
memory location 1
Press:
7 + 1 + 4 + 3 + 3 + 3 + 4 + # (hold 2 sec) + 9 + 1 + 1 + ME + 1