Aclara Technologies LLC 2015001 ユーザーズマニュアル

 

S e r i e s   4 0 0 0   M a i n t e n a n c e   a n d   O p e r a t i o n s   M a n u a l

Pipe Mount

In addition to standard hand tools and safety 
equipment, the Pipe Mounting kit also requires 
the following:

• 0-20 ft-lb Torque-limiting wrench

• 0-10 in-lb Torque-limiting wrench or 

screwdriver

Thread one of the clamps through both slots 

in one of the brackets and around the pipe.

Rotate the bracket to the desired mounting 
position and tighten the clamp just enough 
to maintain bracket position.

Thread the remaining clamp through the 
remaining bracket and around the pipe.

There are three mounting holes at the top of 

the MTU and three at the bottom.

If mounting to a Horizontal pipe, use the 
top left and top right mounting holes.

If mounting to a Vertical pipe, use the top 
center and bottom center mounting holes.

Insert one of the bolts through a metal 
washer, the appropriate MTU mounting 
hole, and a nylon washer before threading it 
into the bracket.

Repeat step 5 with the remaining hardware 
to secure MTU to the remaining bracket.

Tighten both clamp screws to 7-9 in-lb.

Tighten both bracket bolts to 14-16 ft-lb.