Z Com Inc XG621 ユーザーズマニュアル
18
CHAPTER 5: WIRELESS NETWORK FUNDAMENTALS
Wireless Network Configuration
Ad-hoc Mode (Peer-to-Peer Workgroup)
The Institute of Electrical and Electronics Engineers (IEEE) standard for wireless LANs (WLANs),
802.11, offers two methods for configuring a wireless network — ad-hoc and infrastructure. In an
ad-hoc network, computers are brought together as needed; thus, there is no structure, nor are
802.11, offers two methods for configuring a wireless network — ad-hoc and infrastructure. In an
ad-hoc network, computers are brought together as needed; thus, there is no structure, nor are
there fixed points to the network — each node can generally communicate with any other node.
There is no access point involved in this configuration. It enables you to quickly set up a small
wireless workgroup and allows workgroup members to exchange data or share printers as
supported by Microsoft Networking in the various Windows operating systems. Some vendors also
refer to ad-hoc networking as Peer-to-Peer group networking.
In this configuration, network packets are directly sent and received by the intended transmitting
and receiving stations. As long as the stations are within range of one another, this is the easiest
and least expansive way to set up a wireless network.
To set up an ad-hoc workgroup operating with standard protocols, do the following:
There is no access point involved in this configuration. It enables you to quickly set up a small
wireless workgroup and allows workgroup members to exchange data or share printers as
supported by Microsoft Networking in the various Windows operating systems. Some vendors also
refer to ad-hoc networking as Peer-to-Peer group networking.
In this configuration, network packets are directly sent and received by the intended transmitting
and receiving stations. As long as the stations are within range of one another, this is the easiest
and least expansive way to set up a wireless network.
To set up an ad-hoc workgroup operating with standard protocols, do the following:
Set all stations to connect in Ad-hoc mode (or Peer-to-Peer workgroup mode).
Set all stations to use the same network name (or SSID).
Set all stations to either (1) use no WEP encryption key or (2) use an identical WEP
encryption ke
encryption ke
y.
Set all stations to use the same wireless channel for communication.
Infrastructure Mode
With a wireless access point, you can put the wireless LAN into the Infrastructure mode. It provides
wireless connectivity to multiple wireless network devices within a fixed range or area of coverage,
interacting with a wireless node via an antenna.
In the Infrastructure mode, the wireless access point converts airwave data into wired Ethernet data,
acting as a bridge between the wired LAN and wireless clients. Connecting multiple access points
via a wired Ethernet backbone can further extend the wireless network coverage. As a mobile
computing device moves out of the range of one access point, it moves into the range of another.
As a result, wireless clients can freely roam from one Access Point domain to another and still
maintain seamless network connection.
To set up an infrastructure network operating with standard protocols, do the following:
wireless connectivity to multiple wireless network devices within a fixed range or area of coverage,
interacting with a wireless node via an antenna.
In the Infrastructure mode, the wireless access point converts airwave data into wired Ethernet data,
acting as a bridge between the wired LAN and wireless clients. Connecting multiple access points
via a wired Ethernet backbone can further extend the wireless network coverage. As a mobile
computing device moves out of the range of one access point, it moves into the range of another.
As a result, wireless clients can freely roam from one Access Point domain to another and still
maintain seamless network connection.
To set up an infrastructure network operating with standard protocols, do the following:
Set all wireless stations to connect in Infrastructure mode.
Set all stations to use the same network name (or SSID).
Set all wireless access points to use the same network name (or ESSID).
Set all stations to either (1) use no WEP encryption key or (2) an identical WEP encryption key.
Set up wireless channels used by individual access points. (It is not necessary to set channels
on the stations as the stations will automatically scan through all channels for the nearest
access point.)
on the stations as the stations will automatically scan through all channels for the nearest
access point.)