Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 10
15. The Select Network Component Type window appears. Select Protocol, and click
Add. The Select Network Protocol window appears. In the Manufactures section,
select Microsoft. In the Network Protocols section, select TCP/IP then click OK.
select Microsoft. In the Network Protocols section, select TCP/IP then click OK.
16. Back at the Network window, scroll through the installed network component window
and select TCP/IP à ITeX ADSL PCI NIC.
NOTE: If the TCP/IP à ITeX ADSL PCI NIC is not found, click Add, select Adapter,
click Add , select Microsoft from the manufacturer window, select Dial up Adapter
from the network adapter window, click OK.
click Add , select Microsoft from the manufacturer window, select Dial up Adapter
from the network adapter window, click OK.
17. Still at the Network window, click the Configuration tab, select TCP/IP à ITeX
ADSL PCI NIC. Then click the Properties button.
18. The TCP/IP Properties window will appear. Select the IP Address tab and then select
the Specify an IP Address option. Enter the IP Address and Subnet Mask settings.
19. To setup a new gateway, select the Gateway tab enter, the setting in the New
Gateway section and click Add .
20. To configure the Domain Name Server. Enter DNS Configuration select the Enable
DNS option. Enter the Host and Domain settings. Enter the DNS Server Search Order
and click Add.
and click Add.
21. Once all the TCP/IP properties have been set, click OK to return to the Network window.
22. Click OK to close the Network window.
23. When prompted "Do you want to restart your computer now?" Click Yes.
NOTE: The default installation ADSL mode is ANSI T1.413 Issue 2 or ANSI. If your ISP
is providing a different mode then you need to update the drivers.
is providing a different mode then you need to update the drivers.