Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 11
Bridged Ethernet service for Windows 95A
1.
After installing the IA-300 card, power on the PC system. The Hardware Wizard will
detect the IA-300 as a PCI Network Controller. Select the Driver from disk
provided by hardware manufacturer option.
detect the IA-300 as a PCI Network Controller. Select the Driver from disk
provided by hardware manufacturer option.
2.
Insert the IA-300 Driver CD into the CD-ROM drive.
3.
The Install From Disk window appears. Enter the <CD drive
letter>:\Drivers\Win95_98\BEoA (e.g. D:\Drivers\Win95_98\BEoA), then click OK.
letter>:\Drivers\Win95_98\BEoA (e.g. D:\Drivers\Win95_98\BEoA), then click OK.
4.
When the Service Option window appears, click Next for the default installation
(VPI=8, VCI=35, Framing=LLC). For Advanced settings, please consult your ADSL
service provider for detailed information.
(VPI=8, VCI=35, Framing=LLC). For Advanced settings, please consult your ADSL
service provider for detailed information.
NOTE: If you clicked Advanced, the Service Options window shows the Connection
Address. Enter the service Connection Address, click OK. The previous Service
Option window will appear, click Next.
Address. Enter the service Connection Address, click OK. The previous Service
Option window will appear, click Next.
NOTE: If prompted, insert your Windows 95 CD into the drive and click OK.
NOTE: If during the file copying process a file is reported as “not found” enter the path
<CD drive letter>:\Win95 (e.g. D:\Win95)
<CD drive letter>:\Win95 (e.g. D:\Win95)
5.
At the conclusion of the IA-300 driver installation, the Diagnostic Tool icon will appear
disabled on the task bar. You must now Restart the PC system to complete the
installation; the Diagnostic Tool will then become active.
disabled on the task bar. You must now Restart the PC system to complete the
installation; the Diagnostic Tool will then become active.
6.
Proceed to Bridged Ethernet ADSL Service Configuration, page 14.