Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 20
The Diagnostic program performs a brief hardware check and displays the hardware status.
If the IA-300 fails the Diagnostic tests (shown below), then record the test result and
contact customer support.
contact customer support.
ADSL Bridge - PCI I/O Test
i90188 chip test è Pass
i90135 Registers Test
i90135 chip test è Pass
i90135 Memory Test
i90135 chip test è Pass
ADSL Bridge – PCI DMA Loopback
i90188 Fast datapath
è Trial 20, Pass 20
…Interleave datapath
è Trial 20, Pass 20
i90135 Utopia Loopback
i90135 Fast datapath
è Trial 20, Pass 20
…Interleave datapath
è Trial 20, Pass 20
NOTE: For all loopback tests, both Trial and Pass counts equal 20 for success.
Click Close to exit the Diagnostic program. The ADSL modem is disconnected for these
diagnostic tests. To IA-300 card is functioning properly, it will automatically reconnect.
diagnostic tests. To IA-300 card is functioning properly, it will automatically reconnect.
CONFIGURING THE CONNECTION SERVICE
To view or edit the ADSL connection service address, Right -click the Diagnostic Tool icon
(located on the taskbar), and select the Configuration option.
(located on the taskbar), and select the Configuration option.
The PVC Setup (Permanent Virtual Connection) window displays the connection service
address. Click Close to exit window.
address. Click Close to exit window.
To edit the connection service address, select and enter the VPI and VCI address in the
field shown and click PVC Setting.
field shown and click PVC Setting.
To accept a Connection Address that has been changed (and Restart the PC system) click
Yes. Click No to quit and return to PVC setup window.
Yes. Click No to quit and return to PVC setup window.
TROUBLE SHOOTING
If you have completed the Alcatel Speed Touch installation procedures and your ADSL
connection is not operational, then refer to the following guidelines for assistance in getting
your ADSL modem connection up and running.
If you have completed the Alcatel Speed Touch installation procedures and your ADSL
connection is not operational, then refer to the following guidelines for assistance in getting
your ADSL modem connection up and running.
Description of Problems
1
Is there a Diagnostic ICON on the taskbar?
q Try Restarting the PC system.
q Are the correct drivers installed for the Operating system used?
q PPPoA - If system operating system is Windows 95, is the DUN upgraded
q Try Restarting the PC system.
q Are the correct drivers installed for the Operating system used?
q PPPoA - If system operating system is Windows 95, is the DUN upgraded
v1.3?
q Have you deleted the drivers and tried the installation again?
2
Is the NIC achieving ADSL connection?
q Try using the Diagnostic Tools Connect option
q Is the cable installed between the Alcatel Speed Touch PC and the ADSL
q Try using the Diagnostic Tools Connect option
q Is the cable installed between the Alcatel Speed Touch PC and the ADSL
service?
q Try Restarting the PC system.
q Has any cabling adapter or wiring converter been removed?
q Has any cabling adapter or wiring converter been removed?