Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 22
11 Driver installation resulted in unexpected errors or warnings, and you
can’t connect.
q Perform the driver removal procedure.
q Verify which version of Microsoft Windows is loaded in the PC system.
q Perform the Alcatel Speed Touch PC driver removal procedure
q For PPPoA – Reload Dial -Up Network upgrade 1.3
q Install the Alcatel Speed Touch PC driver again.
q Perform the driver removal procedure.
q Verify which version of Microsoft Windows is loaded in the PC system.
q Perform the Alcatel Speed Touch PC driver removal procedure
q For PPPoA – Reload Dial -Up Network upgrade 1.3
q Install the Alcatel Speed Touch PC driver again.
CONNECTOR PINOUT
The IA-300 card is equipped with a RJ-11 jack for connection to the
ADSL data port – identified by the ADSL installation. The center two
pins, pins 3 and 4, are used for ADSL data. For the IA-300 card to
make a proper ADSL connection, the installed ADSL data port should
also use pins 3 and 4 for data. If the ADSL data port installation uses pins 2 and 5 for data,
then a wiring converter will be required. Do not alter or remove the wiring converter if present.
ADSL data port – identified by the ADSL installation. The center two
pins, pins 3 and 4, are used for ADSL data. For the IA-300 card to
make a proper ADSL connection, the installed ADSL data port should
also use pins 3 and 4 for data. If the ADSL data port installation uses pins 2 and 5 for data,
then a wiring converter will be required. Do not alter or remove the wiring converter if present.
NOTE: Consult with your ADSL provider before attempting any wiring changes.