Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 6
Point to point Service for windows nt 4.0
NOTE: To perform the installation logon as Administrator. Also the TCP/IP protocol
must be installed prior to the driver installation.
must be installed prior to the driver installation.
1.
At the desktop, double click My Computer, then double click Control Panel .
2.
In the Control Panel window, double click the Network icon then select the Adapters
tab.
tab.
3.
Click Add (to add new adapters).
4.
In the Select Network Adapter window click Have Disk.
5.
Insert the IA-300 Driver CD into the CD-ROM drive, enter the < CD drive
letter>:\Drivers\NT40\PPPoA (e.g. D: \Drivers\NT40\PPPoA), then click OK.
letter>:\Drivers\NT40\PPPoA (e.g. D: \Drivers\NT40\PPPoA), then click OK.
6.
The Select OEM Option window will find the ITeX ADSL PCI NIC driver, Click OK.
The system will copy the drivers to the hard drive.
The system will copy the drivers to the hard drive.
7.
When the Service Option window appears, click Next for the default installation
(VPI=0, VCI=35, Framing=VC MUX). For Advanced settings, please consult your ADSL
service provider for detailed information.
(VPI=0, VCI=35, Framing=VC MUX). For Advanced settings, please consult your ADSL
service provider for detailed information.
NOTE: If you clicked Advanced, the Service Options window shows the Connection
Address. Enter the service Connection Address. Click OK. The previous Service
Option window will appear, click next.
Address. Enter the service Connection Address. Click OK. The previous Service
Option window will appear, click next.
8.
Next the Remote Access Services (RAS) will need to be installed. Click OK to
continue.
continue.
9.
Insert the Windows NT4.0 CD into the drive and in the space provided enter the path
<CD drive letter>:\i386 (e.g. D:\i386) then click Continue .
<CD drive letter>:\i386 (e.g. D:\i386) then click Continue .
10. The Add RAS Device window appears. Click
OK
11. The Remote Access Setup will appear showing ITeX1 itexwana .... Click Network to
display the network configuration.
12. Select the protocol (e.g. TCP/IP), if a protocol has not been loaded the Windows NT
4.0 CD will be required. Click OK. Then click Continue .
13.
T
he Network window will appear at the conclusion of the installation to confirm
installation of the IA-300 card.
14. Click on Protocols tab and verify that the ADSL Management and Monitor Interface
is present.
15. Still in the Network window, click on the Services tab to verify that the Remote
Access Service is present. Click Close .
NOTE: To review the Network window properties at any time, right-click the Network
Neighborhood icon and select Properties.
Neighborhood icon and select Properties.
NOTE: If no previous network devices have been installed, then the Network
Neighborhood icon will not be present on the desktop. To open the Network window,
double-click My Computer then Control Panel then Network.
Neighborhood icon will not be present on the desktop. To open the Network window,
double-click My Computer then Control Panel then Network.