Turbocomm Tech Inc. IA300 ユーザーズマニュアル
Model : IA-300
Installation Guide
Page 7
16. The PC system needs to be restarted for the changes to take effect. Click Yes
17. After the system restarts the Diagnostic Tools icon will appear on the task bar. When
the IA-300 card is connected to the ADSL data port, both panels of the icon will appear
black signifying an ADSL connection.
black signifying an ADSL connection.
18. To begin a dial-up connection, double-click My Computer, then double-click Dial-Up
Networking.
19. If this is the first dial-up connection created enter an area code (e.g. 408) for your
region, then click Close. If this is not your first dial-up, go to step 23.
20. Click OK to create a phonebook entry for a first time dial-up connection.
21. Enter a name for the phonebook entry (e.g. MyDialUpServer) and click Next.
22. When the Server window appears click Next.
23. The Dial-Up Networking window prompts for the phone number of the dial-up server.
Unless instructed to enter a phone number by the ISP, enter zero “0” Still at the Dial-
Up Networking window, click More.
Up Networking window, click More.
24. The Edit Phonebook Entry window appears. Select the Security tab and verify that
“Accept only Microsoft encrypted authentication ” is selected. Click OK. The
previous Dial-Up Networking window appears, click Dial.
previous Dial-Up Networking window appears, click Dial.
25. The Connect to MyDialUpServer window appears. Enter the User name, Password
and Domain, then click OK.
NOTE: Refer to you ADSL Worksheet for this information or contact your ISP provider.
NOTE: The text “Verifying username and password…” will be displayed while logon
authentication takes place.
authentication takes place.
NOTE: If this screen persists and a connection logon error is reported, confirm that the
correct Username and Password are entered and try the connection again. Also verify
that the connection address is correct.
correct Username and Password are entered and try the connection again. Also verify
that the connection address is correct.
26. This window is displayed at the completion of a successful Dial-Up logon. Choose a
display behavior and click OK to close.
NOTE: The default installation ADSL mode is ANSI T1.413 Issue 2 or ANSI. If your ISP
is providing a different mode then you need to change the setting
is providing a different mode then you need to change the setting
27. On the right-hand side of the task bar, right click on the Diagnostic Tools icon. Then
select Configuration.
28. The Configuration window appears. Select the ADSL Mode option and then select
the ADSL mode type provided by your ISP. The service mode type will be one of the
following:
following:
q
ITU G.992.1 Annex A (G.dmt) ....................referred to as G.dmt
q
ITU G.992.2 Annex A/B (G.lite)..................referred to as G.lite
q
ANSI T1.413 Issue 2.......................................referred to as ANSI
29. After you select and check your ISP’s service mode, click Set.
Congratulations, you are done. Your IA-300 ADSL card the Internet is established!