For 82x devices, the System tab enables you to view system specific information namely LED/RSSI Display when Sync/RSSI
is enabled in LED Display Status. To configure the LED Display Status, navigate to Advanced Configuration > System
and select any one of the configurable values: Disable, RSSI, and Sync. Refer,

LED Status

for more details.

7.1.1 RSSI LED Behavior

When the link is established, the Received Signal Strength Indicator (RSSI) LEDs on the scaling mask glow. Scaling mask LEDs
indicate the received signal strength of the link. The more LEDs on the scaling mask glow, better is the signal. By default,
RSSI Display mode is enabled, if required the user can select the Disable (LEDs Off) mode. In Disable (LEDs Off) mode, all
the 5 LEDs will be off.

: 'RSSI LED' feature is applicable only to 82x devices.

To view RSSI, navigate to MONITOR > System. The LED/RSSI Display screen appears as shown below.

Figure 7-1 LED/RSSI Display (RSSI)