Wi Lan Inc EB04 ユーザーズマニュアル
3 Configure Units
APR 2002 Rev 03
19
• Select Station Type. Choose Remote Unit.
• Select Station Rank. Enter the rank number of the remote unit. Enter a number from 1–1000.
• Choose a Center Frequency. Enter the value of the center frequency (range is 57410–58338
in 400 kHz steps). All wireless units must be set to the same center frequency.
• Select Security Password x. Enter security passwords (each password can be up to eight
digits long in hexadecimal) for the unit. All units in the same network must have the same set of
security passwords.
security passwords.
• Select Scrambling Code. Enter a hexadecimal value or leave the default at “0”. All units in the
same network must have the same scambling code.
• Select Acquisition Code. Enter a value from 0–15. (All units in the same network must have
the same acquisition code.)
• Select Config Test Minutes. Enter a time in minutes, for example, 10. The unit will automat-
ically reboot when this time period expires, and uses the settings stored in flash memory instead of
current settings.
current settings.
• Select Tx Power Level Adjust. Choose an initial value of 0 dB, which means no Tx power
attenuation.
• Select Remote Unit RF Group. Enter a value from 0–63. (For testing purposes, you may leave
the value = 0.)
• Select Reboot New RF configuration and press
Enter.
The unit reboots and the Login
window is displayed.
7.
Log in to the unit. (Type supervisor for the password). The Main Menu is displayed.
8.
Select Radio Module Configuration and press
Enter.
The Radio Module Configuration window
is displayed. The settings under Current change to values that were in the New column.
9.
Select Save Current Config to Flash and press
Enter.
The new settings are stored in flash
memory and displayed on the menu. The word
appears on the screen.
H - Help Radio Module Configuration
New Current Flash
Station Type -> Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) 1 1 1
Center Frequency (57410-58338) 5.7874 GHz 5.7874 GHz 5.7874 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 1 1 1
Config Test Minutes (1-120) 30 30 30
Tx Power Level Adjust 0 dB 0 dB 0 dB
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1 1 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) 0 0 0
Reboot New RF configuration Press Enter to Execute
Save Current Config to Flash Press Enter to Execute
Success