Twinhead International Corporation E14A ユーザーズマニュアル

Chapter 2 — Getting Started 

DVD-ROM, Combo Drive, or DVD±RW 

Your computer comes with a pre-installed CD-ROM, DVD-ROM, Combo 
drive or DVD±RW. The CD-ROM drive is a read-only drive. It cannot be used 
to write data to a recordable CD. The CD-ROM drive can read data from CDs, 
including audio or video CDs. The CD-RW can perform these same functions, 
as well as record information to writeable CD's. The DVD drive can read both 
DVDs and CDs. Your notebook identifies the drive with the letter following the 
hard drive letter. If your hard drive is D, then the CD-ROM drive will be E.  

1.  Press the button on the front of the 

drive to open the disk tray and pull 
the tray open. 

2.  Place the disk on the tray, label 

side up.  

3.  Place the disk on the central 

spindle and press gently until the 
disk clicks into place.  

4.  Slide back the tray until it clicks 

shut.  

1.  Make sure the computer is not 

accessing the CD-ROM drive. 

2.  Press the eject button and pull the 

tray all the way out. 

3.   Pick up the CD by the edges and 

remove the CD-ROM from the tray. 
Push the tray into the computer 
until it closes fully. 

 

 

When the computer is reading from a CD-

ROM/CD-RW/DVD, the indicator light for the CD-ROM 
will flash on. Do not attempt to remove a disk 
while this light is active. 
The lock is located to the left of the eject 
button. In locked mode, the drive will stop if the 
eject button is accidentally pressed when reading a 
CD. When this happens, please unlock the drive, 
press eject and push the tray back into the 
computer before reading again.