Laird Controls North America Inc. EXC9158A ユーザーズマニュアル
Edition 04/2007 US, Version A001, Excalibur, Subject to Technical Changes
Page: 7
2.2.3 Installing the Receiver
To install the receiver, please use the mounting drawings contained in the appendix.
2.2.4 Electrical Connection of the Receiver
For the electrical connection to the mains supply and the assignment of the contact terminals please
refer to the connection plan in the appendix and the attached interface plan.
refer to the connection plan in the appendix and the attached interface plan.
The system can be put into operation after the completion of all installation work.
2.3 Transmitter
2.3.1 Inserting the Rechargeable Battery into the Transmitter:
⇒
Insert the charged battery [2] into the transmitter [3] (the transmitter should point downwards),
⇒
Lock the battery in place by turning the knob [1].
Warning!
The radio rem ote control system is shipped with a discharged battery.
The radio rem ote control system is shipped with a discharged battery.
The battery must be correctly charged before the system is put into operation.
The transmitter is now ready for use.
2.3.2. Transmitter Labelling
The transmitter can be given an individual labelling to suit the specific use of the radio remote control
system. For this purpose, the system comes with a sheet of self-adhesive labels that can be affixed in
the label fields on the transmitter.
An optional second labelling sheet is available for specific applications.
system. For this purpose, the system comes with a sheet of self-adhesive labels that can be affixed in
the label fields on the transmitter.
An optional second labelling sheet is available for specific applications.