Laird Controls North America Inc. EXC9158A ユーザーズマニュアル
Edition 04/2007 US, Version A001, Excalibur, Subject to Technical Changes
Page: 9
3.1.3 Transmitter Blink Sequences [Status Indications] of the Status-LED
Status Indications
Status LED
Action
Normal operation
Blinks green at 1.25 s intervals.
—
Early warning of low
voltage
Blinks red at 1.0 s intervals.
Insert a charged battery within 10
min. or charge the battery.
3.1.4 Switching Off the Transmitter:
⇒
Press 1st step of STOP pushbutton [1] [OFF] or,
⇒
Press 2nd step of the STOP pushbutton [1]
3.1.5 TransKey
The system -specific parameters are activated with the data stored in the TransKey. A label with the ID
address is affixed to each TransKey.
address is affixed to each TransKey.
Warning!
Transmitter and receiver TransKeys must not be swapped.
Transmitter and receiver TransKeys must not be swapped.
The transmitter TransKey is black.
The receiver TransKey is yellow.
A swapping of the TransKeys results in a fault indication in the transmitter and in the
receiver [see LED blink sequences]. The system will not go into operation.
receiver [see LED blink sequences]. The system will not go into operation.