VeriFone 1619-20XPL ユーザーズマニュアル
CONFIDENTIAL
Version A
Page 30 of 37
MasterCard® PayPass™ Contactless Transit Pilots
Installation Guide
NOTE PLEASE ENSURE THAT THE POWER CABLE IS NOT PLUGGED INTO THE 3-PIN
SOCKET BEFORE INSTALLATION COMMENCES.
SOCKET BEFORE INSTALLATION COMMENCES.
4.5
Installation Process
The Installation process comprises the following steps.
4.5.1
Hardware Installation
1.
Open the CAM door.
2.
Fix the Secura Control Unit Assembly to the shelf within the CAM.
3.
Drill 4 holes on the right door of the CAM using the template supplied.
4.
Fix the contactless card reader assembly to the door and secure with the fixing bolts
provided.
provided.
5.
Attach the Secura to the LED Indicator Board Cable using the LED Board Cable,
08828-01-R.
08828-01-R.
6.
Attach the Secura to the Contactless Reader using OTI Contactless Reader Cable,
08829-01-R.
08829-01-R.
7.
Attach the Secura to the LAN cable.
8.
Attach the Secura to the turnstile release using the Solenoid Cable, 08827-02-R.
Ensure that the terminals are connected red to red and black to black.
Ensure that the terminals are connected red to red and black to black.
9.
Ensure that all connection points are fully home.
4.5.2
Functional Test
1.
Plug in the power and ensure that the Secura powers up correctly and the LEDS
light up. The Secura display will display a couple of events, namely:
light up. The Secura display will display a couple of events, namely:
o
Event 20 – power up
o
Event 23 – In Service
2.
The terminal may attempt to contact MMS at this point, to pick up its configuration.
This will take a few moments to complete.
This will take a few moments to complete.
3.
A number of self-tests can then be carried out using the key board functions of the
Secura. Refer to section 5 for full details of the available functions.
Secura. Refer to section 5 for full details of the available functions.
a.
Select function 37 on the keyboard, press 3, 7 then ENT. This will switch on
the green LEDs
the green LEDs
b.
Select function 38 on the keyboard, press 3, 8 then ENT. This will switch on
the green LEDs
the green LEDs
c.
Select function 26 on the keyboard, press 2, 6 then ENT. This will exercise
the green LEDs, the red LEDS and fire a turnstile release (solenoid) pulse.
the green LEDs, the red LEDS and fire a turnstile release (solenoid) pulse.
d.
If the terminal has not contacted MMS when power was applied, perform a
communications test to ensure that connectivity with MMS can be established
satisfactorily. Do this by selecting function 46.
communications test to ensure that connectivity with MMS can be established
satisfactorily. Do this by selecting function 46.
e.
Test that communications with the Transit Payment Platform Authorisation
Server can be established by performing function 44.
Server can be established by performing function 44.