Bright Box HK Limited RB3P ユーザーズマニュアル
Page 7 of 10
Merchandising goods must be packed in such way that from the outside the content cannot be seen.
This is required for theft prevention.
This is required for theft prevention.
Single goods should be packed by preference in a carton box. In case this is not feasible, a non-
transparent over pack plastic bag is required in addition to the normal plastic packaging.
transparent over pack plastic bag is required in addition to the normal plastic packaging.
All goods must be packed in an over pack box, labelled with the same unit label, but mentioning the
correct QTY in the over pack box.
correct QTY in the over pack box.
When packing more than one type or size of a merchandising good, clear dividers have to be used in
the over pack box to define the differences.
the over pack box to define the differences.
In case gift boxes are part of the merchandising goods, these have to be protected so that damage to
the gift box is prevented.
the gift box is prevented.
Label requirements
Below an example of the label is given. Bright Box follows labeling requirements of the OEM. The size,
font type, can be taken from the OEM standards.
font type, can be taken from the OEM standards.
The over pack box will be labelled in the same way as the kit box, mentioning the part number, bar
code and the number of kits inside.
code and the number of kits inside.
Label Size
The size of the label can be decided by the supplier (from the 2 indicated sizes), based upon the size of
the packing boxes. In case of large boxes, two labels must be used on the box, one on the side and one
on the front of the box. The label will always be put on the boxes in such way that they are visible when
packed on a pallet.
the packing boxes. In case of large boxes, two labels must be used on the box, one on the side and one
on the front of the box. The label will always be put on the boxes in such way that they are visible when
packed on a pallet.
Typeface
The primary typeface to be used is Helvetica or any cut of Helvetica. As an alternative, Arial can be
applied. As a rule, all typing should be done ranged left, unjustified on the right.
If the Customer has specific requirements Bright Box will follow them.
applied. As a rule, all typing should be done ranged left, unjustified on the right.
If the Customer has specific requirements Bright Box will follow them.
Color
The label must be printed on a white base using the customer (car maker) color for the frame, with
printing for the manufacturer logo and the other items. The color will be applied according to genuine
parts labelling requirements of the OEM.
printing for the manufacturer logo and the other items. The color will be applied according to genuine
parts labelling requirements of the OEM.
Part name
Bar code of the CPU number
Economic Origin