Gait Up PHYS5POMOC ユーザーズマニュアル
12 June 2017 - Physilog5usermanual.pdf-v1.2.3 - Check www.gaitup.com for the latest version. Copyright 2017 Gait Up SA. CH-1015 SWITZERLAND
9
- Disconnect the Physilog® by clicking on “Disconnect” and close the tab of the Physilog®5
- Do a reset of the Physilog® (hold the main button until the LED shines orange, blinks red
and then stops)
- Plug the Physilog® to the computer and update the date and time (see above)
- Do a reset of the Physilog® (hold the main button until the LED shines orange, blinks red
and then stops)
- Plug the Physilog® to the computer and update the date and time (see above)
iOS
- Install the “nRF Toolbox” on the iOS device
- Download the latest firmware version from the email to the iOS
device
device
- Add the downloaded firmware to nRF Toolbox by connecting the iOS
device to the computer
device to the computer
- Open iTunes and select your phone
- Select the “Apps” tab on the left and scroll down
- Under “File Sharing” select the nRF Toolbox app and add the
Firmware file to the Documents list
Firmware file to the Documents list
- Click on “Done” and disconnect phone from computer
- Open the nRF Connect app on the iOS device and enable Buetooth
- Shortly push the main button of the Physilog®5 to enter detection mode