Zeni Lite Buoy Co. Ltd. 4180026 ユーザーズマニュアル
Installation
Page 13
5.3 Mounting the transceiver
The transceiver can be mounted to a physical aid to navigation using fixing screws, washers and nuts. The
screws are inserted through the four mounting holes located under the end trims of the enclosure.
Consideration should be given to cable routing and VHF and GNSS antenna location when selecting an
installation location.
Overall dimensions for the transceiver are provided in Figure 24.
screws are inserted through the four mounting holes located under the end trims of the enclosure.
Consideration should be given to cable routing and VHF and GNSS antenna location when selecting an
installation location.
Overall dimensions for the transceiver are provided in Figure 24.
Figure 5
Mounting the transceiver
T1
T1+S
T3
T3+S